Fiberglass Mesh 50gr
Reinforcement mesh that prevents cracks and locks the system.
Fiberglass Mesh 50gr is the alkali- and rot-resistant reinforcement mesh embedded between the two Microcement Base passes — the layer that bridges hairline substrate movement and stops it telegraphing through the 2–3 mm microcement finish. Required for floors and shower zones across the KCBerry system.
- Alkali and rot resistant
- Crack-bridging across substrates
- Required for floors and showers
- Embedded between base coats
Embed between first and second base coat.
Crack-bridging for microcement floors and showers
Fiberglass Mesh 50gr is embedded across the whole surface (walls) or across joints and stress lines (floors) between the first and second Microcement Base coat. It is what turns two thin trowel passes into a monolithic, crack-resistant underlay for the finish system on top.
On floors and in wet zones — where movement in the substrate is the single biggest cause of finish failure — mesh is not optional. It is part of the specification.
Alkali and rot resistant
The 50 g/m² fibreglass mesh is alkali-resistant so it survives the cementitious KCBerry mix, and rot-resistant so it stays intact for the life of the surface. Cut to size on site with scissors and press into the wet first Base coat.
Product FAQ.
Everything specifiers, applicators and homeowners ask before ordering.
What buyers say.
Frequently bought together.
Add these to your order.
Metallic Paint
Premium metallic accent finish over black microcement.
PU Sealer & Varnish
High-performance polyurethane that waterproofs and protects.
Royal Resin
Premium binding resin for stronger, longer-lasting microcement.
Pigments
40 standard colours to pigment your microcement mix.