Pool Resin (25 L)
Liquid component of the Poolciment system.
Pool Resin is the liquid component of the KCBerry Poolciment system. It is mixed with Poolciment XL (base layer) and Poolciment M (finish) to form a seamless, jointless coating designed for permanent immersion, finally sealed with Poolsealer.
- Liquid component of Poolciment XL and M
- 3.6 L per 20 kg XL, 4 L per 20 kg M
- Pigment added to the resin first
- 25 L container
Mixing resin for Poolciment XL and Poolciment M.
One resin for both pool coats
Use 3.6 L of Pool Resin per 20 kg bucket of Poolciment XL and 4 L per 20 kg bucket of Poolciment M. For the finish, the weighed pigment is added to the resin first.
Respect the stated ratios: too much or too little resin compromises performance under immersion.
Directions for use
Pour the Pool Resin into an empty container, then gradually add the Poolciment while mixing mechanically until smooth — Poolciment into the resin, never the other way round. Apply with a stainless steel trowel, allowing 4–6 hours between coats. Keep tightly closed, protected from frost and excessive heat.
Product FAQ.
Everything specifiers, applicators and homeowners ask before ordering.
What buyers say.
Frequently bought together.
Poolciment XL (20 kg)
Two-component base microcement for swimming pools and tanks.
Poolciment M (20 kg)
Pigmented finishing microcement for pools and tanks.
Poolsealer (5 L)
Waterproofing sealer for pool microcement — mandatory final coat.
KC Primer
Fast-drying bonding primer for flawless adhesion.
Pigments
40 standard colours to pigment your microcement mix.
Add these to your order.
Complete Kit — 10m²
Full system for seamless microcement — primer to sealer. Covers 10m².
Complete Kit — 20m²
Complete microcement kit, primer to sealer. Covers 20m².
Complete Kit — 30m²
Complete microcement kit, primer to sealer. Covers 30m².
Complete Kit — 40m²
Complete microcement kit, primer to sealer. Covers 40m².