Plan the system behind these ideas with our guide to microcement bathrooms. For another mineral-finish comparison, read microcement versus tadelakt.
A microcement bathroom is the quiet-luxury alternative to tiles: one continuous, jointless surface flowing from walls to floor to shower. Below are the ideas, finishes and colour choices that work best in Irish homes — plus the practical notes that make the difference between a good result and a great one.
Why microcement suits bathrooms
- Seamless & jointless — no grout lines to interrupt the eye or trap grime.
- Water-resistant once sealed — suitable for bathroom floors; showers and wet rooms require SubVap tanking beneath the finish.
- Applied over existing tiles — no rip-out, no skip, finished in days rather than weeks.
- Just 2–3 mm thick — doors, skirtings and thresholds usually stay in place.
Where microcement goes in a bathroom
The most striking projects treat the whole room as one surface — walls, floor and shower enclosure all in the same shade for a monolithic, spa-like feel. If that feels bold, mix and match: microcement on the shower and vanity wall, a softer contrast on the remaining walls; or microcement floors with painted or panelled walls.
- Shower & wet room — a fully-sealed, jointless enclosure with no silicone corners to discolour.
- Vanity & splashback — the vanity, worktop and splashback in one continuous run.
- Floor — flows straight into the shower tray with a subtle fall for drainage.
- Feature walls — behind a freestanding bath, or a single accent wall in a deeper tone.
Choosing a finish: matt, satin or gloss
The finish changes how a colour reads and how the room feels. Every KCBerry shade is available in all three:
- Matt — soft, contemporary, forgiving day-to-day. The default for most bathrooms.
- Satin — a subtle depth and light-catch without being reflective.
- Gloss — deepens the colour and reflects light for a striking, statement look; shows more.
Colours that work in Irish bathrooms
Irish daylight is soft and cool, and many bathrooms are windowless or north-facing. Warm neutrals flatter that light better than very cold greys:
- Soft sands & warm neutrals — timeless, and they brighten low-light rooms.
- Warm greys & greige — the current designer default; pair beautifully with brass, black or oak.
- Off-whites & chalks — maximise light in small or internal bathrooms.
- Deep slates & charcoals — dramatic for showers or feature walls with good lighting.
- Earthy clays & ochres — tactile and calm, especially with natural wood joinery.
KCBerry offers 73 shades in total — 40 standard and 33 Pure lime-based. Browse the full palette on the colours page or order a sample kit from the shop and view them in your own light.
Over existing tiles?
Yes — this is the most common bathroom scenario in Ireland. With a specialist primer and a fibre-reinforced base coat, microcement bonds directly over sound tiles. Full walkthrough here: can microcement be applied over tiles?
Cost & application
Supply-only Complete Kits are fixed price on the shop. Applicator labour is quoted per project by whoever applies it, because it depends on area, substrate prep and the finish chosen. For a full breakdown, see our microcement bathroom cost guide, or get product advice for your specific room.
DIY or professional?
A careful DIYer can tackle a downstairs WC or a feature wall with a Complete Kit and patience. For family bathrooms, wet rooms and gloss finishes, professional application is the safer choice — KCBerry materials carry a 5-year materials warranty. See real projects in the portfolio.
Frequently asked questions
Is microcement good for bathrooms?
Yes — sealed microcement is water-resistant, has no grout to scrub, and gives a seamless, contemporary finish across walls, floors and shower areas.
What colours suit a microcement bathroom?
Warm neutrals, greige, soft sands and off-whites flatter Irish daylight; deep slates work as feature walls or in well-lit showers.
Can microcement be applied over my existing bathroom tiles?
Yes — with a specialist primer and a fibre-reinforced base coat, over sound, well-fixed tiles, with no rip-out.
Matt, satin or gloss for a bathroom?
Matt is the most forgiving; satin adds subtle depth; gloss reflects light and deepens the colour but shows more.
Ready to plan yours? Browse colours, explore bathroom applications, or get product advice.